Stewart Screen Information
Neve
The perfect balance between the widest possible viewing cone and the best possible viewing conditions....Ideally suited for applications where lighting can be controlled.
Surface Characteristics
- Textureless Surface Intended for 1080p+ / UHD / 4K Projection
- Extremely Durable
- Washable and Mildew Resistant
- Flame Retardant
- Greenguard™ Certified
- ISF™ Certified
Surface Material Properties
|
Maximum Size |
8.83' x 90' Seamless |
|
Peak Gain |
1.1 |
|
Half Gain |
80 Degrees |
|
Ambient Light Front Reflectance Value |
90% |
|
Ambient Light Resistance |
Poor |
|
Minimum Throw Distance |
1.0 x image width |
|
Edge Blending Properties |
Poor |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
Tiburon G2
The perfect balance between the widest possible viewing cone and the best possible viewing conditions. For applications without proper light control.
The shade of gray is held super tight to spectral neutrality, no shift in color of any type.
Surface Characteristics
- Textureless Surface Intended for 1080p+ / UHD / 4K Projection
- Extremely Durable
- Washable and Mildew Resistant
- Flame Retardant
- Greenguard™ Certified
- ISF™ Certified
Surface Material Properties
|
Maximum Size |
8.83' x 90' Seamless |
|
Peak Gain |
0.8 |
|
Half Gain |
80 Degrees |
|
Ambient Light Front Reflectance Value |
60% |
|
Ambient Light Resistance |
Good |
|
Minimum Throw Distance |
1.3 x image width |
|
Edge Blending Properties |
Poor |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
|
Perforate |
Yes |
StudioTek 100
StudioTek 100 is a flexible, front projection, matte-white screen formulated to meet the strictest color and white field uniformity standards.
This unity gain material is an optimal diffuser and disperses light in a near perfect, hemispherical distribution so that image brightness is virtually unchanged when viewed from any angle. StudioTek 100 is the de facto standard for Digital Intermediary and Color Timing Post Production facilities. The extremely wide viewing cone necessitates a careful and dedicated management of the reflected light in the viewing environment.
- Great choice for use in applications where edge blending is required
- Matte-white, unity gain reference screen
- Enhanced focusing capabilities
- Superb color and white field uniformity
- Superior performance in environments where ambient light can be controlled
Surface Material Properties
|
Peak Gain |
1.0 |
|
Half Gain |
Full Lambertian Diffuser |
|
Ambient Light Rejection Value |
15% |
|
Ambient Light Resistance |
N/A |
|
Minimum Throw Distance |
No Minimum |
|
Edge Blending Properties |
Excellent |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
StudioTek 130
StudioTek 130 is a flexible, front projection, screen material that is formulated to provide optimized white field uniformity unmatched by competing gain screens.
StudioTek 130 is over 30% brighter than a matte-white screen surface. Certified by THX, StudioTek 130 is the reference standard projection material within the AV industry.
- Over 30% brighter than matte-white material
- Studio industry's standard reference screen
- Re-formulated optical coating allows for enhanced focusing capabilities
- Superb color and white field uniformity
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)
Surface Material Properties
|
Peak Gain |
1.3 |
|
Half Gain |
80 Degrees |
|
Ambient Light Rejection Value |
17% |
|
Ambient Light Resistance |
N/A |
|
Minimum Throw Distance |
1.3 x Image Width |
|
Edge Blending Properties |
Fair |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
StudioTek 130 G4 Perforated
StudioTek 130 G4 Perforated is a flexible, front projection, screen material that is formulated to provide optimized white field uniformity unmatched by competing gain screens.
StudioTek 130 G4 Perforated is over 30% brighter than a matte-white screen surface. Certified by THX, StudioTek 130 G4 Perforated is the reference standard projection material within the AV industry.
- Over 30% brighter than matte-white material
- Studio industry's standard reference screen
- Re-formulated optical coating allows for enhanced focusing capabilities
- Superb color and white field uniformity
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)
Surface Material Properties
|
Peak Gain |
1.3 |
|
Half Gain |
80 Degrees |
|
Ambient Light Rejection Value |
17% |
|
Ambient Light Resistance |
N/A |
|
Minimum Throw Distance |
1.3 x Image Width |
|
Edge Blending Properties |
Fair |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
Phantom HALR
A flexible, front projection, high ambient light rejection, screen material, Phantom HALR offers excellent ambient light rejection capabilities that deliver an exceptional entertainment experience, day or night.
Unlike other manufacturers’ offerings, It is the only black screen on the market that can be perforated for acoustical transparency, which includes Stewart’s exclusive Microperf X² THX-Ultra or Cinemaperf options, depending on the size of the screen. For installation versatility, Phantom HALR can be configured with any of Stewart’s ElectriScreen or fixed frame models.
Surface Characteristics
- Phantom HALR is available in any image size up to 40 feet by 90 feet, seamlessly.
- Acoustical Transparency
- Microperf X² THX-Ultra or Cinemaperf options
- Ambient Light Rejection
Surface Material Properties
|
Peak Gain |
1.0 |
|
Half Gain |
30 Degrees |
|
Ambient Light Rejection Value |
82% |
|
Ambient Light Resistance |
Excellent |
|
Minimum Throw Distance |
1.8 x Image Width |
|
Edge Blending Properties |
N/A |
|
Passive 3D use |
Yes |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
Phantom HALR Perforated
A flexible, front projection, high ambient light rejection, screen material, Phantom HALR offers excellent ambient light rejection capabilities that deliver an exceptional entertainment experience, day or night.
Unlike other manufacturers’ offerings, It is the only black screen on the market that can be perforated for acoustical transparency, which includes Stewart’s exclusive Microperf X² THX-Ultra or Cinemaperf options, depending on the size of the screen. For installation versatility, Phantom HALR can be configured with any of Stewart’s ElectriScreen or fixed frame models.
Surface Characteristics
- Phantom HALR is available in any image size up to 40 feet by 90 feet, seamlessly.
- Acoustical Transparency
- Microperf X² THX-Ultra or Cinemaperf
- Ambient Light Rejection
Surface Material Properties
|
Peak Gain |
1.0 |
|
Half Gain |
30 Degrees |
|
Ambient Light Rejection Value |
82% |
|
Ambient Light Resistance |
Excellent |
|
Minimum Throw Distance |
1.8 x Image Width |
|
Edge Blending Properties |
N/A |
|
Passive 3D use |
Yes |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
Firehawk G5
FireHawk, in its fifth generation, is a flexible, front projection, screen surface engineered for use with today’s high-powered projection technology in applications involving the presence of ambient light.
Ambient light is the enemy of two-piece projection. Screens designed to reject ambient light can be effective at furnishing an image in even the brightest of rooms, but the trade-off is the presence of unwanted artifacts such as color-shift, hot-spotting, and poor off-axis viewing. Stewart Filmscreen is in the business of image fidelity, and FireHawk was designed to provide the best possible trade-off between image fidelity and ambient light resistance. With improvements to uniformity and off-axis viewing, FireHawk G4 is even closer to the reference quality and image fidelity that have long been synonymous with Stewart Filmscreen. Click to download spec sheet.
Surface Characteristics
- Reformulated optical coating allows for enhanced focusing capabilities
- Superior performance in environments with ambient light
- Offers superb black levels, shadow detailing, and overall color saturation
- Increased image contrast and resolution
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)
Surface Material Properties
|
Peak Gain |
1.1 |
|
Half Gain |
35 Degrees |
|
Ambient Light Rejection Value |
73% |
|
Ambient Light Resistance |
Very Good |
|
Minimum Throw Distance |
1.6 x Image Width |
|
Edge Blending Properties |
N/A |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
Firehawk G5 Perforated
FireHawk, in its fifth generation, is a flexible, front projection, screen surface engineered for use with today’s high-powered projection technology in applications involving the presence of ambient light.
Ambient light is the enemy of two-piece projection. Screens designed to reject ambient light can be effective at furnishing an image in even the brightest of rooms, but the trade-off is the presence of unwanted artifacts such as color-shift, hot-spotting, and poor off-axis viewing. Stewart Filmscreen is in the business of image fidelity, and FireHawk G5 was designed to provide the best possible trade-off between image fidelity and ambient light resistance. With improvements to uniformity and off-axis viewing, FireHawk G5 is even closer to the reference quality and image fidelity that have long been synonymous with Stewart Filmscreen. Click to download spec sheet.
Surface Characteristics
- Reformulated optical coating allows for enhanced focusing capabilities
- Superior performance in environments with ambient light
- Offers superb black levels, shadow detailing, and overall color saturation
- Increased image contrast and resolution
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)
Surface Material Properties
|
Peak Gain |
1.1 |
|
Half Gain |
35 Degrees |
|
Ambient Light Rejection Value |
73% |
|
Ambient Light Resistance |
Very Good |
|
Minimum Throw Distance |
1.6 x Image Width |
|
Edge Blending Properties |
N/A |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
StudioTek 100 Perforated
StudioTek 100 is a flexible, front projection, matte-white screen formulated to meet the strictest color and white field uniformity standards.
This unity gain material is an optimal diffuser and disperses light in a near perfect, hemispherical distribution so that image brightness is virtually unchanged when viewed from any angle. StudioTek 100 is the de facto standard for Digital Intermediary and Color Timing Post Production facilities. The extremely wide viewing cone necessitates a careful and dedicated management of the reflected light in the viewing environment.
- Great choice for use in applications where edge blending is required
- Matte-white, unity gain reference screen
- Enhanced focusing capabilities
- Superb color and white field uniformity
- Superior performance in environments where ambient light can be controlled
Surface Material Properties
|
Peak Gain |
1.0 |
|
Half Gain |
Full Lambertian Diffuser |
|
Ambient Light Rejection Value |
15% |
|
Ambient Light Resistance |
N/A |
|
Minimum Throw Distance |
No Minimum |
|
Edge Blending Properties |
Excellent |
|
Passive 3D use |
No |
|
Lay Flat Quality |
Excellent |
|
Flame Resistance |
Yes |
SnoMatte 100
SnoMatte 100 is a flexible, front projection, matte white screen formulated to meet the strictest color and white field uniformity standards. This unity gain reference material is an optimal diffuser and disperses light in a near perfect, hemispherical distribution. The extremely wide viewing cone necessitates a high degree of commitment to attenuate reflected light in the viewing environment. When enhanced focusing is required, this fabric will deliver sharp images without ghosting or any loss in contrast.
Surface Characteristics
- Wide Viewing Cone
- Flexible Front Material
- Superb color and white field uniformity
Surface Material Properties
|
Maximum Size |
90' x 40' |
|
Peak Gain |
1.0 |
|
Visual Angle |
180 Degrees |
|
Ambient Light Rejection |
15% |
|
Minimum Throw Distance |
0.3 x Image Width |
Blackhawk UST
The Blackhawk UST surface features enhanced center-to-edge uniformity, superb contrast preservation, and exemplary color accuracy. The screen features a lenticular structure for the redirection of the highly variable angles of incident light, provided by UST projectors. The lenticular surface rejects any overhead light. For optimal image, below screen positioning of the projector will produce stunning results with the Blackhawk UST.
Surface Characteristics
- Excellent Ambient Light Resistance
- Flexible Front Material
- Excellent Lay Flat Quality
Surface Material Properties
| Maximum Size | 104.5" x 58.75" |
| Peak Gain | 0.55 |
| Visual Angle | 170 Degrees |
| Ambient Light Rejection | 80% |
| Minimum Throw Distance | 0.3 x Image Width |
